How to Make Glass Bottles Step by Step

How to Make Glass Bottles Step by Step

#1 Raw Materials For Making Glass Bottles

Raw materials that we primarily use in the manufacture of glass bottles are sand, soda ash, limestone and cullet.These materials are mixed in a specific ratio to make soda lime glass. Other types of glass bottles may, however, require additional inputs. For instance, dyes and chemical compounds may be added in the manufacturing process to produce colored bottles or heat-resistant borosilicate glass.

#2 Batching Process for Making Glass Bottles

Once the raw materials are gathered and prepared, they are placed in a hopper machine for mixing. The mixture is then put into batching compartments in measured portions. It is from these compartments that it is fed into the melting furnace through a conveyor belt.

Batching is an important phase of glass bottle manufacturing. The mixture portions have to be accurate to ensure consistent quality. Their sizes are determined by the design and the number of bottles to be made.

#3 Glass melting during bottle production process

The melting phase takes place in a heating furnace where the raw materials are subjected to high temperatures of about 1600°C. The water content evaporates and organic matter is burned off while the remainder of the mixture melts to form molten glass. Finally, the molten glass is cooled to achieve viscosity in readiness for the formation stage.

All our furnaces are fully automated. Their temperatures settings are controlled by our engineers from an integrated control room using special software.

#4 Blow glass forming processes

Glass formation involves the molding of molten glass into the desired bottle shapes. First, the viscous mixture is cut into gobs of equal size using a timed blade. The gobs fall into separate slots of an individual section machine. Each slot contains a shaping mold.

The final shape is achieved by either Blow and blow method or Press and blow method.

Blow and Blow Process

In the Blow and Blow method, compressed air is used to shape the bottle. It is blown onto the molten gob and pushes it to take the shape of the mold. This initial shape is referred to as a parison.The parison is then flipped to an upright position, reheated and injected with more air to fully define its shape.

This method is used for narrow glass bottles such as beer glass bottles , wine glass bottlesor soda glass bottles.

Finished bottle

Press and Blow Process

The Press and Blow method involves the use of both a plunger and air to shape bottles. When the molten gob falls into the individual section, a plunger pushes it to fit the mold. This action defines it into a parison which is then transferred to a blow mold. There, it is reheated and blown with air until it is properly shaped.

This method is preferred for wide-mouth glass containers such as glass vases, glass candle jars or milk bottles.

Gob dropped into black mold

Final shape blown

Finished jar

#5 Annealing and Conditioning Processes in Glass Bottle Manufacturing

After the rigorous process of formation, the glass bottles are allowed to cool before being moved into an Annealing Lehr. It is a long kiln that has controlled temperature settings. In it, the glass bottles are slowly reheated and then gradually cooled again to a temperature below the strain point of glass.

Annealing is important as it minimizes the internal stresses in the glass bottles that can lead to shattering. It also ensures an even settling of the glass material.

We control the annealing process to:

• Ensure the consistency of material

• Minimize stresses

• Prevent spontaneous breakage